The day I got her:
![Image](https://farm2.staticflickr.com/1489/24366445292_ee2d581c6d_z.jpg)
![Image](https://farm2.staticflickr.com/1672/24448567876_cb014a35d2_z.jpg)
![Image](https://farm2.staticflickr.com/1525/23847937123_6c3e042013_z.jpg)
Built my trunk setup:
![Image](https://farm2.staticflickr.com/1543/24366445752_e7a1786d9b_z.jpg)
![Image](https://farm2.staticflickr.com/1542/24366287742_1f1df6d64d_z.jpg)
![Image](https://farm2.staticflickr.com/1485/23846396794_fa0cd969dd_z.jpg)
Got some goodies in the mail and started preparing for actual installation:
![Image](https://farm2.staticflickr.com/1564/24474579545_00c9812469_z.jpg)
![Image](https://farm2.staticflickr.com/1634/23846410374_6e7c4ff280_z.jpg)
Originally wanted to run hardlines in the trunk, but ditched them because I couldn't get them to stop leaking.. Will probably try again in the near future.
![Image](https://farm2.staticflickr.com/1482/23854485674_6797ccb2c4_z.jpg)
Finished trunk:
![Image](https://farm2.staticflickr.com/1526/24456483926_e9af9be369_z.jpg)
Got the fronts installed only to find out I wasn't running enough pressure to lift the front end... But here's the front aired out
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Image](https://farm2.staticflickr.com/1519/24549933495_a5b8107e10_z.jpg)
Had to take the fronts back off and ordered a 200psi pressure switch and an Air Zenith OB2. Should be able to finish the install this coming week. I'll be sure to post some updates and some decent pics when I'm finished!